Multiple neighboring active sites of an atomically precise copper nanocluster catalyst for efficient bond-forming reactions.

Atomically precise copper nanoclusters (NCs) are an emerging class of nanomaterials for catalysis. Their versatile core-shell architecture opens the possibility of tailoring their catalytically active sites. Here, we introduce a core-shell copper nanocluster (CuNC), [Cu29(StBu)13Cl5(PPh3)4H10]tBuSO3 (StBu: tert-butylthiol; PPh3: triphenylphosphine), Cu29NC, with multiple accessible active sites on its shell. We show that this nanocluster is a versatile catalyst for C-heteroatom bond formation (C-O, C-N, and C-S) with several advantages over previous Cu systems. When supported, the cluster can also be reused as a heterogeneous catalyst without losing its efficiency, making it a hybrid homogeneous and heterogeneous catalyst. We elucidated the atomic-level mechanism of the catalysis using density functional theory (DFT) calculations based on the single crystal structure. We found that the cooperative action of multiple neighboring active sites is essential for the catalyst's efficiency. The calculations also revealed that oxidative addition is the rate-limiting step that is facilitated by the neighboring active sites of the Cu29NC, which highlights a unique advantage of nanoclusters over traditional copper catalysts. Our results demonstrate the potential of nanoclusters for enabling the rational atomically precise design and investigation of multi-site catalysts.

4'-C-Acetamidomethyl-2'-O-methoxyethyl Nucleic Acid Modifications Improve Thermal Stability, Nuclease Resistance, Potency, and hAgo2 Binding of Small Interfering RNAs.

In this study, we designed the 4'-C-acetamidomethyl-2'-O-methoxyethyl (4'-C-ACM-2'-O-MOE) uridine and thymidine modifications, aiming to test them into small interfering RNAs. Thermal melting studies revealed that incorporating a single 4'-C-ACM-2'-O-MOE modification in the DNA duplex reduced thermal stability. In contrast, an increase in thermal stability was observed when the modification was introduced in DNA:RNA hybrid and in siRNAs. Thermal destabilization in DNA duplex was attributed to unfavorable entropy, which was mainly compensated by the enthalpy factor to some extent. A single 4'-C-ACM-2'-O-MOE thymidine modification at the penultimate position of the 3'-end of dT20 oligonucleotides in the presence of 3'-specific exonucleases, snake venom phosphodiesterase (SVPD), demonstrated significant stability as compared to monomer modifications including 2'-O-Me, 2'-O-MOE, and 2'-F. In gene silencing studies, we found that the 4'-C-ACM-2'-O-MOE uridine or thymidine modifications at the 3'-overhang in the passenger strand in combination with two 2'-F modifications exhibited superior RNAi activity. The results suggest that the dual modification is well tolerated at the 3'-end of the passenger strand, which reflects better siRNA stability and silencing activity. Interestingly, 4'-C-ACM-2'-O-MOE-modified siRNAs showed considerable gene silencing even after 96 h posttransfection; it showed that our modification could induce prolonged gene silencing due to improved metabolic stability. Molecular modeling studies revealed that the introduction of the 4'-C-ACM-2'-O-MOE modification at the 3'-end of the siRNA guide strand helps to anchor the strand within the PAZ domain of the hAgo2 protein. The overall results indicate that the 4'-C-ACM-2'-O-MOE uridine and thymidine modifications are promising modifications to improve the stability, potency, and hAgo2 binding of siRNAs.

Synthesis and Biophysical Properties of Triazole-Incorporated PMOs (TzPMOs): A Convergent, Click Ligation Approach.

The synthesis of phosphorodiamidate morpholino oligonucleotides (PMOs) incorporating single or double triazole rings in the backbone has been achieved via Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC). The synthetic approach implemented is fundamentally convergent, involving the ligation of a 5'-azide PMO fragment to a 3'-alkyne fragment both in solution and on solid support. To access the 3'-alkyne PMO fragment, we synthesized 3'-N-propargyl chlorophosphoramidate morpholino monomers for all four nucleobases. The resulting triazole-incorporated PMOs (TzPMOs) have exhibited comparable or improved binding affinity toward complementary deoxyribonucleic acid (DNA)/ribonucleic acid (RNA) strands compared to its regular analogues. Finally, a full-length TzPMO was designed to target the Nanog gene, demonstrating almost identical hybridization properties when compared to its regular version. Circular dichroism studies revealed a B-type helical conformation for the duplexes formed by TzPMOs.

N3-Methyluridine and 2'-O-Alkyl/2'-Fluoro-N3-methyluridine functionalized nucleic acids improve nuclease resistance while maintaining duplex geometry.

Herein, we report the synthesis of 2'-O-alkyl/2'-fluoro-N3-methyluridine (2'-O-alkyl/2'-F-m3U) phosphoramidites and their incorporation in DNA and RNA oligonucleotides. The duplex binding affinity and base discrimination studies showed that all 2'-O-alkyl/2'-F-m3U modifications significantly decreased the thermal stability and base-pairing discrimination ability. Serum stability study of dT20 with 2'-O-alkyl-m3U modification exhibited excellent nuclease resistance when incubated with 3'-exonucleases (SVPD) or 5'-exonucleases (PDE-II) as compared to m3U, 2'-F, 2'-OMe modified oligonucleotides. MD simulation studies with RNA tetradecamer duplexes illustrated that the m3U and 2'-O-methyl-m3U modifications reduce the duplex stabilities by disrupting the Watson-Crick hydrogen bonding and base-stacking interactions. Further molecular modelling investigations demonstrated that the 2'-O-propyl-m3U modification exhibits steric interactions with amino acid residues in the active site of 3'- and 5'-exonuclease, leading to enhanced stability. These combined data indicate that the 2'-modified-m3U nucleotides can be used as a promising tool to enhance the stability, silencing efficiency, and drug-like properties of antisense/siRNA-based therapeutics.

Synthesis and Biophysical Studies of High-Affinity Morpholino Oligomers Containing G-Clamp Analogs.

Successful syntheses of chlorophosphoramidate morpholino monomers containing tricyclic cytosine analogs phenoxazine, G-clamp, and G8AE-clamp were accomplished. These modified monomers were incorporated into 12-mer oligonucleotides using trityl-chemistry by an automated synthesizer. The resulting phosphorodiamidate morpholino oligomers, containing a single G-clamp, demonstrated notably higher affinity for complementary RNA and DNA compared to the unmodified oligomers under neutral and acidic conditions. The duplexes of RNA and DNA with G-clamp-modified oligomers adopt a B-type helical conformation, as evidenced by CD-spectra and show excellent base recognition properties. Binding affinities were sequence and position dependent.

Exploiting the Marcus inverted region for first-row transition metal-based photoredox catalysis.

Second- and third-row transition metal complexes are widely employed in photocatalysis, whereas earth-abundant first-row transition metals have found only limited use because of the prohibitively fast decay of their excited states. We report an unforeseen reactivity mode for productive photocatalysis that uses cobalt polypyridyl complexes as photocatalysts by exploiting Marcus inverted region behavior that couples increases in excited-state energies with increased excited-state lifetimes. These cobalt (III) complexes can engage in bimolecular reactivity by virtue of their strong redox potentials and sufficiently long excited-state lifetimes, catalyzing oxidative C(sp2)-N coupling of aryl amides with challenging sterically hindered aryl boronic acids. More generally, the results imply that chromophores can be designed to increase excited-state lifetimes while simultaneously increasing excited-state energies, providing a pathway for the use of relatively abundant metals as photoredox catalysts.

Direct Evidence for Excited Ligand Field State-based Oxidative Photoredox Chemistry of a Cobalt(III) Polypyridyl Photosensitizer.

Increasing interest in sustainable chemistry coupled with the quest to explore new reactivity has spurred research on first-row transition metal complexes for potential applications in a variety of settings. One of the more active areas of research is photoredox catalysis, where the synthetically tunable nature of their electronic structures provides a rich palette of options for tailoring their reactivity to a desired chemical transformation. Understanding the mechanism of excited-state reactivity is critical for the informed development of next-generation catalysts, which in turn requires information concerning the propensity of their electronic excited states to engage in the desired electron or energy transfer processes. Herein we provide direct evidence of the highly oxidizing nature of the lowest-energy ligand-field (LF) excited state of a first-row d6-low-spin Co(III) photosensitizer [Co(4,4'-Br2bpy)3]3+ (where 4,4'-Br2bpy is 4,4'-dibromo-2,2'-bipyridine). The redox potential associated with the LF excited state of the Co(III) complex was bracketed by performing bimolecular quenching studies by using a series of simple organic electron donors. Time-resolved absorption spectroscopy confirmed a dynamic quenching process attributed to reductive quenching of the lowest-energy ligand-field excited state of the Co(III) chromophore. Analysis of the Stern-Volmer plots for each chromophore-quencher pair revealed a limiting value of Ered* ∼ 1.25 V vs Fc/Fc+ for the metal-centered excited state, which is significantly stronger than that of more commonly employed transition metal-based photoredox agents such as [Ru(bpy)3]2+ (Ered* = 0.32 V vs Fc/Fc+) and [Ir(ppy)2(bpy)]+ (Ered* = 0.27 V vs Fc/Fc+). These results suggest that this class of chromophores could find utility in applications requiring the activation of oxidatively resistant organic substrates for photoredox catalysis.

Isostructural Nanocluster Manipulation Reveals Pivotal Role of One Surface Atom in Click Chemistry.

Elucidating single-atom effects on the fundamental properties of nanoparticles is challenging because single-atom modifications are typically accompanied by appreciable changes to the overall particle's structure. Herein, we report the synthesis of a [Cu58 H20 PET36 (PPh3 )4 ]2+ (Cu58 ; PET: phenylethanethiolate; PPh3 : triphenylphosphine) nanocluster-an atomically precise nanoparticle-that can be transformed into the surface-defective analog [Cu57 H20 PET36 (PPh3 )4 ]+ (Cu57 ). Both nanoclusters are virtually identical, with five concentric metal shells, save for one missing surface copper atom in Cu57 . Remarkably, the loss of this single surface atom drastically alters the reactivity of the nanocluster. In contrast to Cu58 , Cu57 shows promising activity for click chemistry, particularly photoinduced [3+2] azide-alkyne cycloaddition (AAC), which is attributed to the active catalytic site in Cu57 after the removal of one surface copper atom. Our study not only presents a unique system for uncovering the effect of a single-surface atom modification on nanoparticle properties but also showcases single-atom surface modification as a powerful means for designing nanoparticle catalysts.

Self-transfecting GMO-PMO chimera targeting Nanog enable gene silencing in vitro and suppresses tumor growth in 4T1 allografts in mouse.

Phosphorodiamidate morpholino oligonucleotide (PMO)-based antisense reagents cannot enter cells without the help of a delivery technique, which limits their clinical applications. To overcome this problem, self-transfecting guanidinium-linked morpholino (GMO)-PMO or PMO-GMO chimeras have been explored as antisense agents. GMO facilitates cellular internalization and participates in Watson-Crick base pairing. Targeting NANOG in MCF7 cells resulted in decline of the whole epithelial to mesenchymal transition (EMT) and stemness pathway, evident through its phenotypic manifestations, all of which were promulgated in combination with Taxol due to downregulation of MDR1 and ABCG2. GMO-PMO-mediated knockdown of no tail gene resulted in desired phenotypes in zebrafish even upon delivery after 16-cell stages. In BALB/c mice, 4T1 allografts were found to regress via intra-tumoral administration of NANOG GMO-PMO antisense oligonucleotides (ASOs), which was associated with occurrence of necrotic regions. GMO-PMO-mediated tumor regression restored histopathological damage in liver, kidney, and spleen caused by 4T1 mammary carcinoma. Serum parameters of systemic toxicity indicated that GMO-PMO chimeras are safe. To the best of our knowledge, self-transfecting antisense reagent is the first report since the discovery of guanidinium-linked DNA (DNG), which could be useful as a combination cancer therapy and, in principle, can render inhibition of any target gene without using any delivery vehicle.

Synthesis and Biophysical Properties of Phosphorodiamidate Piperidino Oligomers.

We report the synthesis of piperidino nucleoside phosphoramidates functionalized with uracil, cytosine, guanine, and adenine and their incorporation into oligomers. High-performance liquid chromatography analyses demonstrated that a phosphorodiamidate piperidino oligomer (PPO) is more lipophilic than a phosphorodiamidate morpholino oligomer (PMO) of the same tetrameric sequence. A PMO containing piperidino residues formed duplexes with both DNA and RNA, and the PPO had higher stability at endosomolytic pH and higher hydrophobicity than the PMO.

Synthesis of Chlorophosphoramidate Monomer Morpholinos and PMOs.

Phosphorodiamidate morpholino oligonucleotides (PMOs) are a successful class of antisense reagents that efficiently modulate gene expression. Because PMOs do not follow standard phosphoramidite chemistry, optimized synthetic protocols for these compounds are relatively scarce in the literature. This paper presents detailed protocols for synthesizing full-length PMOs using chlorophosphoramidate chemistry by manual solid-phase synthesis. We first describe the synthesis of Fmoc-protected morpholino hydroxyl monomers, and the corresponding chlorophosphoramidate monomers, from commercially available protected ribonucleosides. The new Fmoc chemistry necessitates the use of a milder base, such as N-ethylmorpholine (NEM), and coupling reagent, such as 5-(ethylthio)-1H-tetrazole (ETT), which are also tolerated for acid-sensitive trityl chemistry. These chlorophosphoramidate monomers are then employed for PMO synthesis in a manual solid-phase procedure using four sequential steps. The synthetic cycle for each nucleotide incorporation consists of (a) deblocking of the 3'-N protecting group using an acidic deblocking cocktail for trityl and base deblocking for Fmoc, (b) neutralization, (c) coupling in the presence of ETT and NEM, and (d) capping of the unreacted morpholine ring-amine. The method uses safe, stable, and inexpensive reagents, and the process is expected to be scalable. After full-length PMO synthesis and ammonia-mediated cleavage from the solid support and deprotection, a range of PMOs with different lengths can be obtained conveniently and efficiently with reproducible good yields. © 2023 Wiley Periodicals LLC. Basic Protocol 1: Synthesis of the novel Fmoc-protected morpholino monomers Basic Protocol 2: Synthesis of the phosphorylating reagent (N,N-dimethylphosphoramic dichloride) required for chlorophosphoramidate monomer synthesis Basic Protocol 3: Synthesis of chlorophosphoramidate monomers of Fmoc-protected morpholino monomers Basic Protocol 4: Solution-phase standardization of dimer and trimer PMO synthesis using Fmoc chemistry Basic Protocol 5: Solid-phase synthesis, purification, and characterization of full-length (25-mer) no-tail PMO using both trityl and Fmoc chemistry.

C5-pyrimidine-functionalized morpholino oligonucleotides exhibit differential binding affinity, target specificity and lipophilicity.

C5-substituted uridine and cytidine morpholino chlorophosphoramidate monomers were synthesized and incorporated into a 12-mer Phosphorodiamidate Morpholino Oligonucleotide (PMO) using semi-automated solid phase synthesis. PMOs with most of the tested pyrimidine C5-substitutions have significantly increased thermal stability when bound to the complementary RNA strand relative to the PMO. They exhibit higher binding with RNA than DNA. CD-spectra show B-type helical conformation of duplexes. HPLC analysis indicates their greater lipophilicity compared to regular PMOs. These chemical modifications have significant potential towards the development of better antisense technologies.

Synthesis of Phosphorodiamidate Morpholino Oligonucleotides Using Trityl and Fmoc Chemistry in an Automated Oligo Synthesizer.

Phosphorodiamidate morpholino oligonucleotides (PMOs) constitute 3 out of the 11 FDA-approved oligonucleotide-based drugs in the last 6 years. PMOs can effectively silence disease-causing genes and modify splicing. However, PMO synthesis has remained challenging for a variety of reasons: inefficient deprotection and coupling methods and instability of monomers. Here, we report the development of a suitable combination of resin supports, deblocking and coupling reagents for synthesizing PMOs using either trityl or Fmoc-protected chlorophosphoramidate monomers. The synthesized PMOs using both the methods on a solid support have been validated for gene silencing in a zebrafish model. The protocol was successfully transferred into an automated DNA synthesizer to make several sequences of PMOs, demonstrating for the first time the adaptation of regular PMOs in a commercial DNA synthesizer. Moreover, PMOs with longer than 20-mer sequences, including FDA-approved Eteplirsen (30-mer), were achieved in >20% overall yield that is superior to previous reports. Hybridization study shows that PMOs exhibit a higher binding affinity toward complementary DNA relative to the DNA/DNA duplex (>6 °C). Additionally, the introduction of Fmoc chemistry into PMOs opens up the possibility for PMO synthesis in commercial peptide synthesizers for future development.

Visible-Light Copper Nanocluster Catalysis for the C-N Coupling of Aryl Chlorides at Room Temperature.

Activation of aryl chlorides in cross-coupling reactions is a long-standing challenge in organic synthesis that is of great interest to industry. Ultrasmall (<3 nm), atomically precise nanoclusters (NCs) are considered one of the most promising catalysts due to their high surface area and unsaturated active sites. Herein, we introduce a copper nanocluster-based catalyst, [Cu61(StBu)26S6Cl6H14] (Cu61NC) that enables C-N bond-forming reactions of aryl chlorides under visible-light irradiation at room temperature. A range of N-heterocyclic nucleophiles and electronically and sterically diverse aryl/hetero chlorides react in this new Cu61NC-catalyzed process to afford the C-N coupling products in good yields. Mechanistic studies indicate that a single-electron-transfer (SET) process between the photoexcited Cu61NC complex and aryl halide enables the C-N-arylation reaction.

Oxygen-supplemented transepithelial-accelerated corneal crosslinking with pulsed irradiation for progressive keratoconus: 1 year outcomes.

PURPOSE: To investigate the effects of combining oxygen supplementation with enhanced UV-A light and increased riboflavin permeability in improving the efficacy of epithelium-on crosslinking (epi-on CXL). SETTING: Private eye clinic in Brisbane, Queensland, Australia. DESIGN: Retrospective single-center nonrandomized uncontrolled longitudinal cohort case series. METHODS: Transepithelial CXL was performed on keratoconic eyes. Applications of an oxygen goggle and pulsed UV-A irradiation (1 second on, 1 second off) were used to enhance oxygen kinetics during epi-on CXL. Additional procedural modifications included the use of benzalkonium chloride and high UV-A irradiance level (30 mW/cm 2 ) to improve the stromal bioavailability of riboflavin and UV-A. The main efficacy outcomes were the changes in mean corrected distance visual acuity (CDVA) and safety over 12 months. Additional refractive and keratometry (K) outcomes were also observed. RESULTS: 53 eyes (38 patients) were included in this study. 12 months postoperatively, mean CDVA improved from a mean of 0.18 ± 0.2 at baseline to 0.07 ± 0.1 logMAR ( P < .0001). No statistically significant change was observed in maximum K (Kmax) and mean K, which were respectively 51.7 ± 5.8 diopters (D) and 46.4 ± 3.85 D at baseline and 51.2 ± 5.7 D ( P = .152) and 46.0 ± 3.84 D ( P = .06) 12 months postoperatively. Only 3 eyes experienced an increase of more than 2 D in Kmax; however, none of these eyes experienced a CDVA loss. There were no reported infections, corneal scarring, or other severe adverse effects. CONCLUSIONS: Performing supplemental oxygen epi-on CXL with accelerated, pulsed UV-A irradiation in conjunction with riboflavin permeability enhancers resulted in improved CDVA ( P < .0001) and stable keratometry up to 12 months postoperatively with a good safety profile.

AUF-1 knockdown in mice undermines gut microbial butyrate-driven hypocholesterolemia through AUF-1-Dicer-1-mir-122 hierarchy.

Introduction and objective: Cholesterol homeostasis is a culmination of cellular synthesis, efflux, and catabolism to important physiological entities where short chain fatty acid, butyrate embodied as a key player. This discourse probes the mechanistic molecular details of butyrate action in maintaining host-cholesterol balance. Methods: Hepatic mir-122 being the most indispensable regulator of cholesterol metabolic enzymes, we studied upstream players of mir-122 biogenesis in the presence and absence of butyrate in Huh7 cells and mice model. We synthesized unique self-transfecting GMO (guanidinium-morpholino-oligo) linked PMO (Phosphorodiamidate-Morpholino Oligo)-based antisense cell-penetrating reagent to selectively knock down the key player in butyrate mediated cholesterol regulation. Results: We showed that butyrate treatment caused upregulation of RNA-binding protein, AUF1 resulting in RNase-III nuclease, Dicer1 instability, and significant diminution of mir-122. We proved the importance of AUF1 and sequential downstream players in AUF1-knock-down mice. Injection of GMO-PMO of AUF1 in mouse caused near absence of AUF1 coupled with increased Dicer1 and mir-122, and reduced serum cholesterol regardless of butyrate treatment indicating that butyrate acts through AUF1. Conclusion: The roster of intracellular players was as follows: AUF1-Dicer1-mir-122 for triggering butyrate driven hypocholesterolemia. To our knowledge this is the first report linking AUF-1 with cholesterol biogenesis.

[Cu36H10(PET)24(PPh3)6Cl2] Reveals Surface Vacancy Defects in Ligand-Stabilized Metal Nanoclusters.

Precise identification and in-depth understanding of defects in nanomaterials can aid in rationally modulating defect-induced functionalities. However, few studies have explored vacancy defects in ligand-stabilized metal nanoclusters with well-defined structures, owing to the substantial challenge of synthesizing and isolating such defective metal nanoclusters. Herein, a novel defective copper hydride nanocluster, [Cu36H10(PET)24(PPh3)6Cl2] (Cu36; PET: phenylethanethiolate; PPh3: triphenylphosphine), is successfully synthesized at the gram scale via a simple one-pot reduction method. Structural analysis reveals that Cu36 is a distorted half cubic nanocluster, evolved from the perfect Nichol's half cube. The two surface copper vacancies in Cu36 are found to be the principal imperfections, which result in some structural adjustments, including copper atom reconstruction near the vacancies as well as ligand modifications (e.g., substitution, migration, and exfoliation). Density functional theory calculations imply that the above-mentioned defects have a considerable influence on the electronic structure and properties. The modeling suggests that the formation of defective Cu36 rather than the perfect half cube is driven by the enlargement of the energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital of the nanocluster. The structural evolution induced by the surface copper atom vacancies provides atomically precise insights into the defect-induced readjustment of the local structure and introduces new avenues for understanding the chemistry of defects in nanomaterials.

[Cu15 (PPh3 )6 (PET)13 ]2+ : a Copper Nanocluster with Crystallization Enhanced Photoluminescence.

Due to their atomically precise structure, photoluminescent copper nanoclusters (Cu NCs) have emerged as promising materials in both fundamental studies and technological applications, such as bio-imaging, cell labeling, phototherapy, and photo-activated catalysis. In this work, a facile strategy is reported for the synthesis of a novel Cu NCs coprotected by thiolate and phosphine ligands, formulated as [Cu15 (PPh3 )6 (PET)13 ]2+ , which exhibits bright emission in the near-infrared (NIR) region (≈720 nm) and crystallization-induced emission enhancement (CIEE) phenomenon. Single crystal X-ray crystallography shows that the NC possesses an extraordinary distorted trigonal antiprismatic Cu6 core and a, unique among metal clusters, "tri-blade fan"-like structure. An in-depth structural investigation of the ligand shell combined with density functional theory calculations reveal that the extended CH···π and π-π intermolecular ligand interactions significantly restrict the intramolecular rotations and vibrations and, thus, are a major reason for the CIEE phenomena. This study provides a strategy for the controllable synthesis of structurally defined Cu NCs with NIR luminescence, which enables essential insights into the origins of their optical properties.

[Cu81(PhS)46(tBuNH2)10(H)32]3+ Reveals the Coexistence of Large Planar Cores and Hemispherical Shells in High-Nuclearity Copper Nanoclusters.

Copper-based nanomaterials have attracted tremendous interest due to their unique properties in the fields of photoluminescence and catalysis. As a result, studies on the correlation between their molecular structure and their properties are of great importance. Copper nanoclusters are a new class of nanomaterials that can provide an atomic-level view of the crystal structure of copper nanoparticles. Herein, a high-nuclearity copper nanocluster with 81 copper atoms, formulated as [Cu81(PhS)46(tBuNH2)10(H)32]3+ (Cu81), was successfully synthesized and fully studied by X-ray crystallography, X-ray photoelectron spectroscopy, hydrogen evolution experiments, electrospray ionization mass spectrometry, nuclear magnetic resonance spectroscopy, and density functional theory calculations. Cu81 exhibits extraordinary structural characteristics, including (i) three types of novel epitaxial surface-protecting motifs; (ii) an unusual planar Cu17 core; (iii) a hemispherical shell, comprised of a curved surface layer and a planar surface layer; and (iv) two distinct, self-organized arrangements of protective ligands on the curved and planar surfaces. The present study sheds light on structurally unexplored copper nanomaterials and paves the way for the synthesis of high-nuclearity copper nanoclusters.

Ambient electrospray deposition Raman spectroscopy (AESD RS) using soft landed preformed silver nanoparticles for rapid and sensitive analysis.

We introduce a technique called ambient electrospray deposition Raman spectroscopy (AESD RS) for rapid and sensitive surface-enhanced Raman scattering (SERS) based detection of analytes using a miniature Raman spectrometer. Using electrospray, soft landing of preformed silver nanoparticles (AgNPs) was performed for 30-40 seconds for different concentrations of analytes deposited on conducting glass slides. Using AESD RS, SERS signals were collected within 4-6 minutes, including sample preparation. Transmission electron microscopy (TEM) and dark-field microscopy (DFM) were used to characterize the preformed AgNPs before and after electrospray. We achieved the nanomolar and micromolar detection of p-mercaptobenzoic acid (p-MBA) and 2,4-dinitrotoluene (2,4-DNT), respectively. In this work, 0.3 µL of preformed AgNPs were used, which is ∼33 times less in volume than the quantity needed for conventional SERS. Quantitation of unknown concentration of analytes was also possible. A similar amount of electrosprayed AgNPs was utilized to characterize Escherichia coli (E. coli) bacteria of different concentrations. Viability of bacteria was tested using fluorescence microscopic imaging. Besides reduced analysis time and improved reproducibility of the data in every analysis, which is generally difficult in SERS, the amount of AgNPs required is an order of magnitude lower in this method. This method could also be used to probe the real-time changes in molecular and biological species under ambient conditions.